| Part No.： | MAX17043 |
| Page： | 14 Pages |
| Size： | 994 KB |
| Manufacturer： | Maxim Integrated |
| Logo： |  |
| Views： | 1 |
| Update Time： | 2024-12-31 10:44:06 |
| DataSheet： | Download |
| Part No. | Packing | SPQ | Marking | MSL | Pins | Temp Range | Package Description | Buy |
| MAX17043G+U | Reel | 1 | 17043 | 1 | 8 | -40°C ~ 85°C | 8-LFCSP-2X3X0.75 | |
| MAX17043G+T | Reel | 10000 | 17043 | 1 | 8 | -40°C ~ 85°C | 8-LFCSP-2X3X0.75 | |
| MAX17043X+ | Reel | 10 | 1 | 9 | -40°C ~ 85°C | Wafer-Level Package 3x3 Bump, Full Array | ||
| MAX17043X+T10 | Reel | 10000 | 1 | 9 | -40°C ~ 85°C | Wafer-Level Package 3x3 Bump, Full Array |
The MAX17043 are ultra-compact, low-cost, host-side fuel-gauge systems for lithium-ion (Li+) batteries in handheld and portable equipment. The MAX17043 is configured to operate with a single lithium cell.
The MAX17043 use a sophisticated Li+ battery-modeling scheme, called ModelGauge™ to track the battery's relative state-of-charge (SOC) continuously over a widely varying charge/discharge profile. Unlike traditional fuel gauges, the ModelGauge algorithm eliminates the need for battery relearn cycles and an external current-sense resistor. Temperature compensation is possible in the application with minimal interaction between a µC and the device.
The IC can be located on the system side, reducing cost and supply chain constraints on the battery. Measurement and estimated capacity data sets are accessed through an I2C interface. The MAX17043 are available in either a 0.4mm pitch 9-bump UCSP™ or 2mm x 3mm, 8-pin TDFN lead-free package.
