| Part No.： | LTM4625 |
| Page： | 26 Pages |
| Size： | 1568 KB |
| Manufacturer： | Linear Technology |
| Logo： |  |
| Views： | 1 |
| Update Time： | 2024-12-14 14:09:33 |
| DataSheet： | Download |
| Part No. | Packing | SPQ | Marking | MSL | Pins | Temp Range | Package Description | Buy |
| LTM4625EY#PBF | Tray | 260 | LTM4625Y | 3 | 25 | -40°C ~ 125°C | 25-Lead BGA (6.25mm x 6.25mm x 5.01mm) | |
| LTM4625IY#PBF | Tray | 260 | LTM4625Y | 3 | 25 | -40°C ~ 125°C | 25-Lead BGA (6.25mm x 6.25mm x 5.01mm) | |
| LTM4625IY | Tray | 260 | LTM4625Y | 3 | 25 | -40°C ~ 125°C | 25-Lead BGA (6.25mm x 6.25mm x 5.01mm) |
The LTM4625 is a complete 5A step-down switching mode μModule (Power Module) regulator in a tiny 6.25mm × 6.25mm × 5.01mm BGA package. Included in the package are the switching controller, power FETs, inductor and support components. Operating over an input voltage range of 4V to 20V or 2.375V to 20V with an external bias supply, the LTM4625 supports an output voltage range of 0.6V to 5.5V, set by a single external resistor. Its high efficiency design delivers up to 5A continuous output current. Only bulk input and output capacitors are needed.
The LTM4625 supports selectable discontinuous mode operation and output voltage tracking for supply rail sequencing. Its high switching frequency and current mode control enable a very fast transient response to line and load changes without sacrificing stability.
Fault protection features include overvoltage, overcurrent and overtemperature protection.
The LTM4625 is available with SnPb or RoHS compliant terminal finish.
| Part Number | Description |
| LTM4624 Datasheet | Lower Current Than LTM4625, Lower VIN, Lower VOUT Accuracy, Same Package BGA Footprint and Height |
| LTM4623 Datasheet | Ultrathin LGA, Lower Current Than LTM4625, Same Package Footprint |
| LTM4619 Datasheet | Dual 4A |
| LTM4644 Datasheet | Quad 4A |
| LTM4649 Datasheet | 10A |
| LTM8020 Datasheet | 200mA, Higher VIN Than LTM4625, Same Package Footprint |
