Part No.: | LTC1053 |
Page: | 16 Pages |
Size: | 284 KB |
Manufacturer: | Linear Technology |
Logo: | |
Views: | 1 |
Update Time: | 2023-11-20 10:01:10 |
DataSheet: | Download |
Part No. | Packing | SPQ | Marking | MSL | Pins | Temp Range | Package Description | Buy |
LTC1053CN#PBF | Tube | 25 | 1 | 14 | 0°C ~ 70°C | 14-Lead PDIP | ||
LTC1053CN#TRPBF | Reel | 1 | 14 | 0°C ~ 70°C | 14-Lead PDIP | |||
LTC1053CN#TRMPBF | Reel | 1 | 14 | 0°C ~ 70°C | 14-Lead PDIP | |||
LTC1053CSW#PBF | Tube | 40 | 1 | 18 | 0°C ~ 70°C | 18-Lead SOIC | ||
LTC1053CSW#TRPBF | Reel | 1000 | 1 | 18 | 0°C ~ 70°C | 18-Lead SOIC | ||
LTC1053CSW#TRMPBF | Reel | 500 | 1 | 18 | 0°C ~ 70°C | 18-Lead SOIC |
The LTC1053 are high performance, low cost quad zero-drift operational amplifiers. The unique achievement of the LTC1053 is that they integrate on chip the sample-and-hold capacitors usually required externally by other chopper amplifiers. Further, the LTC1053 offer better combined overall DC and AC performance than is available from other chopper stabilized amplifiers with or without internal sample/hold capacitors.
The LTC1053 have an offset voltage of 0.5µV, drift of 0.01µV/°C, DC to 10Hz, input noise voltage typically 1.5µVP-P and typical voltage gain of 140dB. The slew rate of 4V/µs and gain bandwidth product of 2.5MHz are achieved with only 1mA of supply current per op amp.
Overload recover times from positive and negative saturation conditions are 1.5ms and 3ms respectively, about a 100 or more times improvement over chopper amplifiers using external capacitors.
The LTC1053 is available in a standard 14-pin plastic package and an 18-pin SO. The LTC1053 are plug in replacements for most standard quad op amps with improved performance.