DataSheetAll » Manufacturer » Analog Devices, Inc. » ADE7868 Datasheet
ADE7868 Datasheet

ADE7868 Datasheet

Poly Phase Multifunction Energy Metering IC with Tamper Detection and Low Power Mode
Part No.: ADE7868
Page: 100 Pages
Size: 1479 KB
Manufacturer: Analog Devices, Inc.
Logo:
Views: 0
Update Time: 2025-02-17 17:30:11
DataSheet: Download

ADE7868 Datasheet Applicable Part

Part No. Packing SPQ Marking MSL Pins Temp Range Package Description Buy
ADE7868ACPZ Tray 490 ADE7868ACPZ 3 40 -40°C ~ 85°C 40-Lead LFCSP_WQ  
ADE7868ACPZ-RL Reel 2500 ADE7868ACPZ 3 40 -40°C ~ 85°C 40-Lead LFCSP_WQ  
SPQ:Standard Pack Quantity;MSL:Moisture Sensitivity Level

ADE7868 Datasheet(PDF)

ADE7868 Datasheet(Picture)

ADE7868 Features

  • Highly accurate; supports EN 50470-1, EN 50470-3, IEC 62053-21, IEC 62053-22, and IEC 62053-23 standards
  • Compatible with 3-phase, 3- or 4-wire (delta or wye), and other 3-phase services
  • Less than 0.1% error in active and reactive energy over a dynamic range of 1000 to 1 at TA = 25°C
  • Less than 0.2% error in active and reactive energy over a dynamic range of 3000 to 1 at TA = 25°C
  • See datasheet for additional features

ADE7868 Applications

  • Energy metering systems

ADE7868 Description

The ADE7868 are high accuracy, 3-phase electrical energy measurement ICs with serial interfaces and three flexible pulse outputs. The ADE78xx devices incorporate second-order sigma-delta (Σ-∆) analog-to-digital converters (ADCs), a digital integrator, reference circuitry, and all of the signal processing required to perform total (fundamental and harmonic) active, reactive (ADE7868), and apparent energy measurement and rms calculations, as well as fundamental-only active and rms calculations. A fixed function digital signal processor (DSP) executes this signal processing. The DSP program is stored in the internal ROM memory. 

The ADE7868 are suitable for measuring active, reactive, and apparent energy in various 3-phase configurations, such as wye or delta services, with both three and four wires. The ADE78xx devices provide system calibration features for each phase, that is, rms offset correction, phase calibration, and gain calibration. The CF1, CF2, and CF3 logic outputs provide a wide choice of power information: total active, reactive, and apparent powers, or the sum of the current rms values, and fundamental active and reactive powers.

The ADE7868 contain waveform sample registers that allow access to all ADC outputs. The devices also incorporate power quality measurements, such as short duration low or high voltage detections, short duration high current variations, line voltage period measurement, and angles between phase voltages and currents. Two serial interfaces, SPI and I2C, can be used to communicate with the ADE78xx. A dedicated high speed interface, the high speed data capture (HSDC) port, can be used in conjunction with I2C to provide access to the ADC outputs and real-time power information. The ADE7868 also have two interrupt request pins, IRQ0 and IRQ1, to indicate that an enabled interrupt event has occurred. For the ADE7868, three specially designed low power modes ensure the continuity of energy accumulation when the ADE6878 / ADE7878 is in a tampering situation. See Table 1 for a quick reference chart listing each part and its functions. The ADE78xx are available in the 40-lead LFCSP, Pb-free package.

ADE7868 Related Parts

About DataSheetAll|Contact Us|Privacy Policy|Manufacturer List|Sitemap|XML|TXT
CopyRight © 2024 DataSheetAll(datasheetall.com)